How To Convert VHS  To DVD With A DVD Recorder

Executive Summary about VCR with DVD Recorder by Cole Figgins

The computer savvy among us will use their computer to transfer their videos to DVD. It requires copying the video to a digital file on the computer using an analog converter. The file gets compressed into MPEG-2 format before being burned onto a DVD.

vcr with dvd recorder

You simply connect your VCR by cable to the DVD recorder. Then while the video plays, it is also recording. If you choose this option, consider purchasing a video processor called a proc amp or a time base corrector. These devices stabilize and improve the quality of the analog video as it is fed to the DVD recorder and can greatly improve the resulting images that you get on the DVD.

The second option is to purchase a combination DVD/VCR recorder. Make sure that you have cleaned the heads of the VCR between copying videos. Understand that if you have videos which are recorded at SLP (6 hours of video on a tape) you will not get the same quality of recording onto a DVD as if the video was recorded at SP (2 hours of video on a tape).

If you find the quality is not acceptable for you, consider changing your method of converting videos to DVD. However, for many people, the time and energy saved in converting the videos on their own will outweigh any concerns over video quality.

How The DVD Recorder Compares To VHS

Executive Summary about VCR with DVD Recorder by John

The biggest reason, without a doubt, is picture and sound quality. When you record on videotape, you always notice that the quality is worse than the original broadcast. Even a relatively cheap DVD is competitive with very expensive tapes – and if you don’t always record at the highest quality, DVDs can hold a truly amazing amount of television.

DVDs don’t wear out. They can scratch, like CDs, but it’s rare, and will generally just cause them to quickly jump over the ruined section. If you want to see evidence of this, try comparing ex-rental VHS to ex-rental DVDs.

To top it all off, the DVD recorders themselves are so much easier to program than VCRs. VCR programming is a mystery that has troubled people for decades, with its mysterious codes and multitude of buttons. Programming a DVD recorder, on the other hand, is as easy as selecting the show you want to record from an on-screen list, and pressing the record button.